Home > Project case > Content

Various materials can be used to make prototypes.

- Jun 06, 2018 -

mainly photosensitive resin. In the vacuum injection mold replica method is mainly used silicone mold. The material of the CNC machining method is divided into two types of metal and non-metal materials. Non-metal mainly refers to some engineering materials, such as: ABS, PC, PP, POM, PA, PMMA (acrylic), bakelite, and substitute wood.

       The CNC-machined materials are usually plate materials with standard thicknesses. Generally, plates with a thickness of more than 100mm are difficult to order, and plates with a thickness of 150mm must be custom-made. Therefore, the price of the board in the processing of the hand board is not uniform, and the price of the board of the special thickness is different.

        Acrylic (PMMA) was transliterated from English Acrylics. Acrylic panels were polymerized from methyl methacrylate (MMA), a polymethyl methacrylate (PMMA) plate plexiglass. Acrylic has high transparency (92% transmittance), excellent weather resistance, good surface hardness and gloss, and great processing plasticity. In a typical hand model, PMMA is suitable for high-transparency hand models such as lights and lenses.

       The prototype is the first step to verify the feasibility of the product, and it is the most direct and effective way to identify defects, defects, and defects of the design product, so as to improve the defects in a targeted manner, and it is impossible to find the deficiency from individual hand-sheets. At this point, it is usually necessary to conduct a small amount of trial production and then find out that there is insufficient improvement in the batch. The products that are designed and completed cannot generally be perfect or even unusable. If there are defects in the direct production, all of them will be scrapped, which will waste human and material resources and time. The general situation of the hand board is a small number of samples, the production cycle is short, and the manpower and material loss is small. Quickly find out the insufficiency of product design and improve it, and provide sufficient basis for the product's setting and mass production.

       In the development of the mold, the problems of time and molding cycle are increasingly emerging. New technologies are emerging. Epoxy molds have been more and more widely used recently. They have also promoted the rapid development of molds. Home Appliances New Product Launch Market.

        Rapid tooling technology is based on the rapid prototyping of the physical model that is the prototype (mother) using the copy method (such as metal spraying, electroplating, composite casting, casting, etc.) to quickly create the main part of the mold (convex, concave die) Or mold cavity, core), its manufacturing cycle is generally 1/5 to 1/10 of the traditional CNC cutting method, but the cost is only 1/3 to 1/5.

        Professional production of plastic, rubber, aluminum alloy, sheet metal proofing of finished products, can make your company's product development more smoothly, reduce product errors and risks; allows your customers to confirm your company's products and participate in the exhibition before production , appearance shooting, business marketing and many other preparatory work.

The company has professional and technical force, through scientific work flow, combined with long-term practice, and constantly forging ahead, according to customer design philosophy, to create a customer satisfaction hand model.


Related Industry Knowledge

Related Products

  • Grit Blasting
  • Painting with Spray Paint
  • Laser Engraving Aluminum Machining
  • 3D StereoLithography Rapid Prototyping Printing Model Service
  • Aluminum Extrusions Models Fabrication Accurate Machining
  • Beatles Earphone Prototype Made By Silicone Molding.